нажмите чтобы посмотреть большую картину
Shenzhen LED multi-sectoral joint export trade barriers serious Weapon
1. Product specifications summary details
1.1 Specifications
Size: 600 * 600MM
Material: Aluminum + PMMA
Lighting Color: Silver
Light color: warm white (color temperature :2900-3200K), are white (color temperature :5500-6500K)
Light Source: Single 3528 0.06W
LED Quantity 378
Weight: 4KG
Beam angle:
Life:> 50,000 hours
Insulation voltage: 3000V
1.2 Power Specifications
Input voltage :85-265V 50-60Hz/AC
Rated Power: 24W
Output Voltage: 24V/DC
Output Current: 3A
Standard reservation line:
1.3 Environmental Specifications
Operating temperature: -20-40 ℃
Storage temperature: -20 - 80 ℃
Surface temperature :30 - 40 ℃
For humidity :10-90% RH
Protection: Interior Products
1.4 illumination (LUX)
Color
0.5M
1M
1.5M
2M
2.5M
3M
Is white
2218
697
362
220
150
110
Warm white
1908
600
311
190
130
95
1.5 Light Output (Lm lumens)
Color
Output
(Lm)
Power
(W)
Luminous efficiency
(Lm / W)
Is white
1676
24
70
Warm white
1508
S24
63
2. Product Features
2.1 LED limit electrical parameters: (Ta = 25 ℃ / led)
Project
Symbol
Ratings
Units
Reverse current
Ir
0.05
mA
Operating temperature
Topr.
-40 ~ 85
℃
Storage temperature
Tstg.
-40 ~ 90
℃
Static breakdown voltage
ESD
2000
V
Limit power
Pd
0.12
W
Forward Current Limit
If (DC)
30
mA
2.2 The specifications of the LED lamp with the brightness and contrast to conventional fluorescent tubes
Features
LED energy saving lamp
Traditional fluorescent tubes
The need for ballast
No
Need
Need starter
No
Need
Is environmentally friendly
Green, RoHS Standards
Do not meet the RoHS standard, mercury
Whether produce ultraviolet
There is no ultraviolet
Will produce ultraviolet
Maintenance
Low maintenance cost, and the lamp can be maintained
The need for regular replacement parts
Life
Long life (≥ 50,000 hours)
Short life (≥ 6500 hours)
Is blinking
No flash frequency
Flicker
Whether there is noise
None (direct power supply case)
There
Energy
Compared with the traditional 50% energy saving fluorescent tubes
3. Application
The products are widely used in large public places, shopping malls, office buildings, corridors and factories. High purity aluminum reflector, anodized surface, reflection efficiency, the entire lamp with aluminum structure, good heat dissipation, high-grade. Use low-voltage output power supply, easy to install, safe, reliable, maintenance-free, low power consumption, long life, under normal circumstances, up to fifty thousand hours or more, green. Through the CCC, CE, UL certification.
4. Note
1: If the lamp is not lit, check the power supply is connected;
2: Do not scrub with a wet towel fixtures:
3: Do not install in damp, leaks, loose parts.
4. To install or remove power before
5. Please use the normal installation
6. If damaged, please look for professionals (or service points) maintenance
5. Shipment inspection standards
5.1 LOT Batch Definition: In principle, the products being manufactured on the same day as a batch (LOT).
5.2 The inspection methods and determination standards
No.
Check items
Standard of acceptance
Inspection norms
1
Appearance
Minor defects AQL 0.65%
Serious defects AQL 0.65%
Fatal flaw c = 0
Common standards with reference to the industry
2
Structure size
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
3
Optical properties
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
5.3 rejects deal
Check your company by defective products if found, please notify us as soon as possible in order to review the two sides decided to dispose of the program.
5.4 compensation for defective products
If the causes of defective products due to product manufacturing, the free replacement of the finished product.
5.5 Other
(1) of this specification, if any trouble spots, by mutual agreement after the treatment.
(2) Any alterations must contact and obtain consent before the two sides to change, and change the contents of records management
6. Reliability experimental standard
Project
Test Method
Sub-set
Hot and humid place
60 ℃, 95% RH/240Hrs
After the test shall be placed in normal temperature and humidity conditions were measured after 24 hours:
(1) changes in optical properties within 20%.
(2) changes in the size dimensions range.
(3) visual inspection of products to meet the requirements.
Cold place
-30 ℃ / 240Hrs
Hot place
80 ℃ / 240 Hrs
High temperature and humidity operating
60 ℃, 95% RH / 240 Hrs
High temperature operation
70 ℃ / 240 Hr
Low Temperature Operation
-20 ℃ / 240 Hr
Drop test
Falling objects, weight and height comparison benchmarks:
Weight G ≤ 9kg drop height H = 760mm;
Product weight 9 <G ≤ 22kg Drop height H = 610mm;
Product weight 22 <G ≤ 45.5kg drop height H = 530mm;
Vibration Test
1.5mm amplitude frequency 50Hz, three faces adjacent to 15 minutes per side
Thermal Shock Test
-30 - ℃ → 25 ℃ ← 80 ℃
(30min) ← (5min) → (30min) 100Cycles
7. Product structure
Installation steps:
1, the plastic card into the iron plate card grain-bit card, unified direction
2, the LED light rigid uniform positive and negative direction of the slice into the plastic card, place cards
3, all the hard light strip bare copper wire with two parallel welded together and go from the middle of a white single wire of the
4 holes on the iron plate aluminum box with the hole on the positive, self-tapping screws with a fixed iron plate lock
5, the L-slot off iron screwed to the aluminum box on the
6, the acrylic bright side, the spring component fixed with screws in the aluminum cover on the box, and press and hold the acrylic
7, the L-fold iron butterfly screws used in the aluminum box on the (L-fold in the installation of iron tablets can be adjusted up or down to match the thickness of smallpox)
8, will lead with the power cord is connected, the panel cover of the spring card into the fold of the iron L-slot, close the panel cover
8. Product physical map
9. Installation diagram
Installation steps:
1, the entire light at an angle from the ceiling into the hole in the right corner, the power After docking on the side, and then adjust the position lights down
2, the L-fold iron adjusted position, lock screw with butterfly
3, the panel cover of the spring card into the fold of the iron L-slot, close the panel cover
10. Shipping packaging
Packaging steps:
1, lamp panels together with plastic bags, plastic bags the power up, and the parts bag with the position, and then into the tray lamp panel
2, the backing card in the specified location
3, will be installed on the lining of the panel tray card
4, the panel cover them with plastic bags and then into the tray lid panel
5, the liner card in the specified location, and then covered with sealing lid
600x600 panel light
