Our street light uses a high-power LED chips, light emitting diodes and general principles are the same, but it is very use of high technology will be integrated on the chip pn top of each particle between the use of gold wire bonding, Use of imported silica gel surface package. We know that gold is the electrical and thermal conductivity of the best, and its chemical stability, not aging, so we have a line on the chip is generally not damaged, pn using a very high performance semiconductor materials, high luminous efficiency The surface of imported silica gel package, to protect the electronic components on a chip from the surrounding environment humidity and temperature, and to prevent electronic components subject to mechanical vibration, impact damage produced characteristic changes caused by component. The LED chip has more of these characteristics, so its long life, high luminous efficiency, the actual life of up to 50,000 hours or more, the luminous flux per watt, up to 70 lumens or more.
LM-S-002
1. Specifications: (1 × 25W) or (1 × 30W) H6000.H5000
2. 80W solar modules
3. Maintenance-free lead-acid batteries 12V/100AH
4. Dedicated controller of solar lamps (overcharge and over discharge protection, light control, and other devices)
5. Rare earth effective energy-saving lamp 12V/25W high brightness or 30W
6. Flux 1500Lm, equivalent to incandescent 150W
7. Color temperature: 2700K, 6400K optional
8. Lighting: 12 hours / day for 5 days rain
9. Lighthouse and then spray the surface with hot-dip galvanizing (color optional), a full set of stainless steel fasteners
10. Adapt to temperature: -40 ℃ to 50 ℃, wind power ≥ 150Km / h
Solar Street Light LM-S-002