szbaiyuanxiang

● Domestic Product selling automatic welding the second point first, two-axis synchronous operation can be wire diameter of 25 ~ 75μm (1 ~ 3 mil). ● the scope of application is mainly used in digital tube, lattice, voice integrated circuits, thick film integrated circuits and transistors and other semiconductor devices within the welding wire. Technical specifications Power supply ● 220VAC ± 10%, 50Hz, requires reliable grounding. Power consumption ● 60W. Applicable to aluminum wire diameter ● 25 ~ 75μm (1 ~ 3 mil). Ultrasonic power ● 0 ~ 5W continuously adjustable. Welding time ● 0 ~ 100ms. Welding pressure ● the first and second welding point can be set, 20 ~ 50g. Minimum welding time ● 0.28 seconds / line (when the span is set to 1mm). An automatic welding from welding the largest span ● no less than 6mm. Table movement range ● Φ15mm. Visual system ● stereomicroscope (15 times, 30 times two stalls) and a picture monitor optional Dimensions ● 600 (length) × 560 (W) × 380 (H) mm. ● Weight about 30Kg. Features ● Automatic welding the second point, and the two axes (welding head displacement) synchronous operation, the wire speed has improved greatly, and thus greatly reduces the possibility of a welding neck broken. ● displacement method for the welding head displacement method. ● reasonable acceleration, deceleration, so that ultra-welding head run more smoothly. ● excellent performance of the arc system, the curvature of the adjustable, and good consistency. ● As a result of automatic detection of steel nozzle is in place and adjusted a numerical check, second check the height of a weld, solder height difference between two large components, too, deal with it smoothly. ● easy to adjust various parameters (ultrasonic power, time, weld pressure, target height, curvature, span) are placed on the panel with the knob. ● unique first spot, second spot system pressure were set to make a weld, two soldering weldability and stability enhancements.