szbaiyuanxiang

Product Name: HS 865 Gold Wire Bonder Product Description: ● selling point increase on the basis of the original high-power light emitting diodes arc generation. ● the scope of application is mainly used in light-emitting diodes, small and medium-power transistors, integrated circuits and other semiconductor devices within a number of special welding wire, especially suitable for welding high-power LED. Technical specifications Power supply ● 220VAC ± 10% (AC110V can be customized), 50Hz, 300W, requires reliable grounding. ● Maximum power consumption 300W. Apply gold wire ● 20 ~ 50μm (0.8 ~ 2 mil). Soldering Temperature ● 60 ~ 400 ℃. ● two-channel ultrasonic power sub 0 ~ 3W two steps adjustable. Welding time ● two channels 0 ~ 100ms. Welding pressure ● two channels 35 ~ 180g minimum welding time ● 0.4s / line. An automatic welding from welding the largest span ● Two-way not less than 4mm. End wire length ● 0 ~ 2mm. Golden Globe size ● 2 to 4 times the diameter can be set. Clamp range of movement ● Φ25mm. Visual system ● stereomicroscope (15 times, 30 times two stalls) and a picture monitor is optional. Dimensions ● 700 (length) × 460 (W) × 550 (H) mm. ● Weight about 28Kg. Features ● One-way weld can remember two lines of data to facilitate the left and right brackets are welded using the same side of a one-way. ● Two-way welding, welding end automatically after the first line to the second line to run a weld at the top, roughly align the second line of the first spot, can improve efficiency and protect the first line of the arc. ● Two-way welding, two inspection lines height, adjustable height of the arch wire, in order to facilitate different height bracket welding two welding. ● curvature increased functionality, there arc 1, arc 2 and arc 3 arc a variety of three options available, you can achieve any desired arc, the arc requires a higher power tube, deep Cup holder and the piranhas will greatly improve the passing rate bracket. ● two welding ball function, can greatly improve the two weld weldability, lower dead point rate. ● Automatic over film Step 1 or 2-step selection for Φ8mm and 10mm from the stents and other large, slice off each time step will greatly improve production efficiency. ● continuous function over film for the rework bracket can improve efficiency. ● chopper detection feature that detects chopper is installed correctly, greatly reduce the man-Weld. ● ultrasonic power four outputs, as far as possible to ensure that solder joints on both sides of the two lines are basically the same, and because the chip stand on the spot parameters are different, select the chip with a different bracket welding power, guaranteed spot on the chip and stand up on the ball a welding requirements are met. ● burning ball performance greatly improved, if more using our unique design of the chopper, get a smaller solder (solder ball) and the more reliable two welding. More suitable for blue, Bai Faguang diode production.